انجکشن مولڈنگ مشین کے لیے ہائیڈرولک آئل کا انتخاب کرنے کے تین معیار!

انجکشن مولڈنگ مشین۔ایک پلاسٹک پروسیسنگ کا عمل ہے ، پولیمر پروسیسنگ بہت زیادہ توانائی استعمال کرے گی ، اور کولنگ ڈیوائس ، ایئر کمپریشن اور دیگر لنکس میں توانائی کی کھپت کی ایک بڑی مقدار بھی پیدا ہوگی۔ اتنی بڑی توانائی کی کھپت انجکشن مولڈنگ مشین کو قدرتی طور پر ہائیڈرولک آئل کی ضرورت ہوگی۔ بہت اعلیٰ معیارات تیار کیے ہیں ، تو انجکشن مولڈنگ مشین کے ہائیڈرولک آئل کا انتخاب کیسے کریں؟ حوالہ کے لیے تین بڑے معیار ہیں!

ہائیڈرولک آئل کے انتخاب کے معیار میں سے ایک۔انجکشن مولڈنگ مشین: ہائیڈولک آئل کو مناسب ویسکوسیٹی اور ٹمپریچر کے ساتھ منتخب کریں۔ کام کرنے پر ہائیڈرولک آئل کی viscosity ضروریات۔  temperature and starting temperature of the انجکشن مولڈنگ مشین are related to the fluidity of the hydraulic action of the انجکشن مولڈنگ مشین and the accuracy of the transmission, which directly affects the working efficiency of the انجکشن مولڈنگ مشین. Therefore, the hydraulic oil selection of the انجکشن مولڈنگ مشین should consider the viscosity and stability. Whether the performance meets the requirements of the production work, if it does not meet the requirements, it should be replaced in time. At the same time, according to different external environmental temperatures, it is also necessary to appropriately select the appropriate hydraulic oil.

ہائیڈرولک آئل کے لیے دوسرا معیار۔انجکشن مولڈنگ مشین: anti-wear hydraulic oil. Generally, under high-pressure work, it will increase the friction during work. Therefore, anti-wear hydraulic oil is a hard requirement. It can not only reduce friction on انجکشن مولڈنگ مشینs. The damage can also improve work efficiency. At the same time, this hydraulic oil also has anti-rust and anti-oxidation effects. The anti-wear hydraulic oil that is given priority for انجکشن مولڈنگ مشینs is generally No. 46 or No. 68.

ہائیڈرولک آئل کے لیے تیسرا معیار۔انجکشن مولڈنگ مشین: the shear stability of the hydraulic oil. In the production process, the hydraulic oil will be severely sheared when passing through the micro-holes of the pump and valve. At this time, the performance and effect of the hydraulic oil will be damaged. Therefore, when the hydraulic oil is selected, the resistance to the hydraulic oil is Shearing capacity must have a high-demand selection standard, which has a good protective effect on maintaining the functionality of the انجکشن مولڈنگ مشین.

There are standards for selecting hydraulic oil, and there must be standards during the use of hydraulic oil. Some hydraulic oils have a reduced efficiency after being used for a period of time, so they must be replaced in time. The blackening of the hydraulic oil or the presence of some impurities in the hydraulic oil is to remind us that there has been a problem with the hydraulic oil. We must pay attention to timely supplement and replacement of the hydraulic oil. This is not only for the maintenance of the انجکشن مولڈنگ مشین, but also saves time and electricity. , An effective guarantee for work.